This is a digital product which includes the STL file ONLY. There is no physical product shipped.
LEGAL DISCLAIMER - PERSONAL USE ONLY
All Camperista3D designs are protected by the Copyright Law. After purchase, you do NOT have the right to copy, share, modify or re-sell any digital file or printed model of my designs for commercial usage without my explicit written consent.
However, you are free to print the physical object as many times as you wish for your personal use. We have worked very hard creating these STL files and would love to continue developing functional parts.
3D PRINTING SETTINGS
- No Support needed
- Layer height: 0.16-0.20 mm
- 20%-40% infill - PLA works great
- Declumper PNG included for cutting from 0.3mm PET foil (Width 55mm)
PART DESCRIPTION
After the success of the DF64 declumper and chute modification, it is finally time for the DF83. Lance Hedrick did a great review on this phenomenal grinder mentioning its only issue - the declumper.
I have put all my experience and engineering skillset into developing this chute and declumper for the DF83. The goal was to reduce the regrinding which is caused by the double stock declumpers and to prevent clogging at high flow rates.
In order to tackle this challenge, two parts are needed.
1. On the one hand, the upgraded declumper which was inspired by the Mythos declumper and is cut out of a PET foil. It removes big clumps, static and the big open cross section area means low resistance and therefore lower retention.
2. The improved chute reduces dead space and removes channel corners by transitioning from a rectangular shape to a round one. This way fine coffee grounds are prevented from accumulating after the declumper and in the chute itself.
Additionally, the opening of the improved chute is larger compared to the stock chute leading to lower probability of clogging.
The angle of the declumper flaps can be manually adjusted to balance static and retention.
Depending on the humidity level of your location one spritz of RDT might be needed.
Installation: In order to install the declumper, the DF83 need to be partially opened. After the stock declumper and chute are removed, the same screws can be used to install the upgraded declumper and chute.
DF83 V2 version comes with two holes for the plasma generator. For the installation, the two pins need to be removed from the original chute and glued to the upgraded chute.
