Skip to product information
1 of 8

Camperista3D

STL - DF64 Low Retention Declumper and Chute

STL - DF64 Low Retention Declumper and Chute

Regular price $6.00 USD
Regular price $8.00 USD Sale price $6.00 USD
Sale Sold out

This is a digital product which includes the STL file ONLY. There is no physical product shipped.

 

LEGAL DISCLAIMER - PERSONAL USE ONLY

All Camperista3D designs are protected by the Copyright Law. After purchase, you do NOT have the right to copy, share, modify or re-sell any digital file or printed model of my designs for commercial usage without my explicit written consent.

However, you are free to print the physical object as many times as you wish for your personal use. We have worked very hard creating these STL files and would love to continue developing functional parts.

 

3D PRINTING SETTINGS

  • No Support needed
  • Layer height: 0.16-0.20 mm
  • 20%-40% infill - PLA works great
  • Declumper PNG included for cutting from 0.3mm PET foil (Width 40mm)

PART DESCRIPTION

Chasing my dream of the perfect DF64, I have designed a declumper and chute combination. Quite a lot of engineering went into the development of these parts. This declumper is an upgrade to the one which was featured on Lance Hedricks youtube channel. It is superior in reducing static compared to the first version.

The main challenge of the DF64 is the stock declumper. The original silicon declumper facilitates regrinding which leads to non-uniformal coffee grounds and cloggs the grinder in the long run.

In order to tackle this challenge, two parts are needed.

1. On the one hand, the upgraded declumper which was inspired by the Mythos declumper and is cut out of a PET foil. It removes big clumps, static and the big open cross section area means low resistance and therefore lower retention.

2. The improved chute reduces dead space and removes channel corners by transitioning from a rectangular shape to a round one. This way fine coffee grounds are prevented from accumulating after the declumper and in the chute itself.

Depending on the humidity level of your location max. 1 spritz of RDT can be needed. In humid regions, the declumper can be even removed to get to almost no retention.

Installation: In order to install the declumper, the DF64 need to be opened (please check in youtube for tutorials). After the stock declumper and chute are removed, the same screws can be used to install the upgraded declumper and chute.

View full details